In 2022, the folks at LIVALL unveiled the PikaBoost, a simple battery-powered motor that could attach to any bicycle, giving it an electric upgrade. Now, the PikaBoost 2 comes with the same pitch as its predecessor, but with a power upgrade, better range, an anti-theft design, and swappable batteries. All you really do is strap the PikaBoost 2 to the back of your bicycle, right above the rear wheel and you’re good to go. The process takes under a minute, but gives your bicycle quite the upgrade, with a motor-assisted drive that can be accessed across 4 riding modes. The best part? Unlike e-bikes that can cost upward of $800-1000, the PikaBoost 2 is a simple under-$300 accessory that pretty much attaches to any existing bicycle.
Designer: LIVALL
Click Here to Buy Now: $279 $369 (24% off). Hurry, only 31 left! Raised over $320,000 raised.
Do you remember when Elon Musk put jet thrusters on the Tesla Roadster to make it go even faster? The PikaBoost 2 is sort of the same thing, but scaled down to less mad-scientist and more practical-genius levels. In essence, it just adds a motor to your existing bicycle, so that you don’t have to rely entirely on pedal power. The PikaBoost 2 outputs an impressive 500W, which when coupled with its high RPM capacity, allows cyclists to conquer steep inclines effortlessly, reaching speeds of up to 32 km/h (19mph) without rider exertion. On flat land, the PikaBoost 2 is a nice way to turn your bicycle from an exercise machine to an effortless mode of transport, allowing you to travel farther and faster without splurging for a gas-powered motorbike or an e-bike.
The slick device retrofits onto almost any existing bicycle simply by attaching itself firmly to the frame right under the seat. Traditional e-bike conversion kits often require significant time and effort to install, with many models being incompatible with a range of bike sizes. In contrast, PikaBoost 2 can be installed or removed in under a minute, thanks to its simplified design that fits most bike models and tire sizes. The system includes a proprietary tool that secures the unit with four anti-theft screws, ensuring a secure fit that’s impossible to remove without the specific tools if you’re a thief… but very easy for you to detach and take home at the end of the day by using the proprietary screw. Additionally, its shock-absorbing spring design helps maintain stability, even on rough terrain, while preventing screw loosening.
PikaBoost 2’s adjustable design seamlessly integrates with wheel sizes from 14 to 29 inches, accommodating mountain bikes, road bikes, and hybrids. LIVALL also provides its own tire designs for the PikaBoost, allowing you to adjust based on road or mountain driving. Once installed, the PikaBoost 2’s wheel rests on the top of your bicycle’s rear wheel, gripping it securely to ensure high traction so it can efficiently transfer kinetic power to your bike’s rear wheel. The V-shaped grooves on the PikaBoost 2 interlock with your bike’s treads, while also providing channels to direct water/mud when you’re riding in the rain or on wet/muddy roads.
One of the standout features of the PikaBoost 2 (and an upgrade from its predecessor) is its AAR2.0 technology, which offers personalized e-bike assistance. Unlike traditional systems that rely on torque sensors, AAR2.0 continuously learns and adapts to your riding style, providing precise power assistance that matches your needs. The regenerative braking system further extends your ride by capturing and converting kinetic energy back into electricity, adding sustainability to your journey. At 25 km/h, the RBS (regenerative braking system) can generate about 100 watts of power to recharge your battery.
Although it seems like the original PikaBoost had a bigger 234Wh battery, the one on the PikaBoost 2 is smaller but MUCH more efficient. Equipped with a 158Wh lithium-ion battery, the system offers a range of up to 70 kilometers or 43.4 miles (an upgrade over the 30 kilometers on the previous model). This size reduction comes with a good reason too, as the folks at LIVALL wanted the battery pack to be ‘airline-friendly’. For those seeking even greater endurance, an optional 220Wh battery extends the range to 96 kilometers or 59.6 miles. Both batteries support fast-charging technology, allowing for a full charge in just three hours. Beyond powering your ride, the battery can also function as a portable power station, with up to 100W of output power, making it versatile for charging everything from your phone to even your laptop.
Each PikaBoost 2 is paired with a remote controller that attaches to your handlebars, allowing you to switch between modes while riding. Notably, the 2nd gen device also gets a few nifty design and safety upgrades in the form of an LED taillight that automatically shines as you slow down or make turns (and also works as a charging status light), as well as fall or slip detection that automatically kills the motor to prevent accidents or injury. The PikaBoost 2 also comes with its own smartphone app, available for both Android and iOS devices. Aside from letting you perform actions like switching between modes, the app also lets you track your PikaBoost 2, as well as uses your location to automatically adjust its output based on riding regulations of the country you’re in (European users will see their speeds capped at 25 km/h to comply with the maximum speed limit). The entire device weighs 6.6lbs or 3 kilograms, and is IP66 water-resistant, making it fairly weatherproof. The PikaBoost 2 ships globally, along with the remote controller, the 158Wh battery, a mudguard, and the proprietary accessories for upgrading your bicycle. An upgrade gets you the 220Wh battery along with mountain and road bike tire attachments, and a fast-charging setup. Additionally, LIVALL also sells its own bicycle helmet with a built-in rear LED light that synchronizes with the PikaBoost 2 to shine automatically when you slow down, turn, or come to a stop.
Click Here to Buy Now: $279 $369 (24% off). Hurry, only 31 left! Raised over $320,000 rasied.
The post Upgrade your Regular Bicycle into an E-Bike with LIVALL’s $279 PikaBoost 2 Accessory first appeared on Yanko Design.
